In 2008 when moving to the first studio the Yamaha DX7 was leaning against the wall while gathering equipment around. It fell to the ground in the mist of twirling around the room packing the stuff. Seeing how the delicate digital apparatus is to be handled in such videos as “Nine Inch Nails Live At Woodstock’94” I thought nothing of it. At the studio when I tried to turn the synth on nothing happened. It was dead, no lights, no sound, nothing.

During the past seven years there has been some attempts to debug the device. I did notice that when I plugged the headphones in and turned it on I could here the hum. During the seven years I opened it several times and tried to see if I could locate the problem without removing any components. One of my friends did take some very quick looks at it always stating that we should someday fix it.

On sixth of March we took another shot at it. The synth was opened and visually inspected and the transformer and regulator part were tested with a multimeter. Everything seemed to be ok as far as we could tell. We almost gave up on it and started to prepare to play something. My friend kept staring at the DX7, it clearly bothered him very much. Suddenly he shouted out “I think I found it”. There seemed to be a crack on the PCB were the voltage regulators were and the massive aluminum heat sink. He took the PCB out and turn it around to see that there really was big enough crack on the ground rail. Now that we knew where the problem was we had to fix it. “Do you have soldering iron here?” “Yes I do 25w” “Ok and how about solder?” “No”. So we had part of the stuff we needed to fix it. I did suggest that we could try to get some solder from an old CD player that was broken. Of course there is no flux so it was not a good idea. We even asked some guys that were in the building if they had solder, but they didn’t. This was a situation that was really annoying. We even looked for solder in the next door rehearsal room where there should have been some solder, but it was lost. Finally my friend said that lets try the old CD player. The soldering iron was heated up and the CD player brought close to the regulator PCB of the DX7. The PCB was sanded to bring out the copper a bit and my friend started heating the solder on the CD players transformer. He tried to get the solder from the transformer to the PCB and to make it stick. The PCB was heated for a long time, but eventually a very tiny drop of the solder got stuck on the PCB. Multimeter that everything was ok and regulator back into the DX7.

The feeling was great after seven years of silence hearing the sound of the Yamaha DX7. I did not even pick up the bass that evening. We changed the tape loop on the Echocord mini after the DX7 project, but that is another story. My friend took the PCB home and did a better fixing on it. The one that was done in the studio was something that I wonder how it work, it was a very tiny drop of solder that worked as a bridge over the crack.

IMG_20150308_123315IMG_20150308_122753IMG_20150308_122811IMG_20150308_123732IMG_20150308_123743IMG_20150308_124023IMG_20150308_124523IMG_20150308_124842

Lets start with a brief history of the studio table. I wanted to place two 24″ lcd monitors side by side on the table. I also wanted to put near field monitors on the sides of the lcd monitors. I also needed deep enough table to fit everything in it. I came up with the measurements 220cm x 80cm would be the needed table top size. Well tables that size didn’t come ready made so I tried to find the next best thing. I did found one table and I tried ordering it, but never got any reply or anything from the company, luckily. So I thought  I was out of luck with the table, but actually I was very in luck.

Time had passed and I had already moved and everything, but I didn’t have a suitable table for my home studio. A friend of mine was working as a carpenter or master guiding carpenter or something at a workshop aimed for the unemployed. He guided people that went there and did what ever was needed, but he also had time to do other things, personal projects. Now this is where my luck turned. He said that he could do the table top for me, just the way I want it.

I did some crude plans for the table top and we went out to buy the wood for it. I had very limited budget at the time so I could only afford 18mm thick glued laminated timber. I bought two pieces since they were 600mm deep and I needed 800mm deep table top. Now in retrospective I could have bought thicker and different kind of wood, but thats in the past now. I also bought black paint and thinner since that table top would be spray painted. We took the timber to the workshop to dry up with his Toyota Corolla if I remember correctly, so now everything was ready.

He constructed the table top. He said that it was a pain in the ass to get the two pieces together straight to extend the 600mm to 800mm, but that I think was the hard part. After the pieces were glued together he made these nice edges from the left out pieces. Looking at the table it looked twice as thick which was a very nice touch. He rounded the corners and edges to make it look nicer. He then painted it black and it was ready after few layers of paint. I had bought four 750mm high legs for it so I had everything to set it up.

We took it to the apartment where I lived at the moment. I can still remember it we took it with his Toyota Corolla. The table top barely fit in and it was slightly over his shoulder. The backseats were turned down and I could just fit in to sit on top of the back seats. It was very difficult to shift gears since the table top was on the way. It was probably quite funny looking when we rode the about a kilometer from the workshop to my apartment. We took the table top to the fourth floor through the staircase because there was no way it could fit in the elevator. I think if I were to go to that staircase today there might still be this black stripe on the wall when one corner hit the wall, but that was the only hit the table top got and we got it nicely to the apartment. The table top looked really nice.

Later that night I screwed the legs to the table and put it in place and I must say that it looked really nice. I was very very pleased with the result. To me it looked nicer than what I had expected. I still today sometimes wonder if the 40 euros was enough for the work he had done. I set most of things on the table that night and thought that it was all worth it, worth the wait to get the table top I wanted. So far I could only find this one photo where you can only see some of my stuff and a bit of the table top.

When I moved to the first studio it was along the same road that where I lived. We carried the table top from the apartment to the studio with my friend who was guitarist for Spex Lab. We had actually once moved my bed the same way when I moved from a student apartment to my own apartment many years earlier.

The friend who made the table top is now playing guitars for Industrial Military Complex.

DSC01206

I was able to find approximately 22m2 space for the studio. It is about 270cm wide and 811cm long, the heigh varies from 215cm to 245cm. The building is an old slaughter house containing businesses, but also rehearsal places with bands playing behind every wall.. well not every, but almost. This is the first place where I know I can make noise after office hours and in weekends and that is a plus. Do not have to worry about someone coming to complain about noise. The downside is that when there are some band playing it isn’t very good for recording or mixing, but that is an issue that can be worked with. The place is bit narrow and this might cause some acoustic treatment problems, but for now it feels a very good place. Industrial Military Complex guitarists other band(s) are the studio neighbor now. Nice folk except they play so damn loud that it disturbs my techno listening and they fart a lot….

The studio is a work in progress. Still not all the stuff are in their place, but it is starting to take shape. Also some acoustics plans have been made and some work has begun for acoustic elements. I am also working on SketchUp of the space and I can post pictures when its ready. For now Industrial Military Complex songs have been worked on in the studio, but so far nothing else. There is the possibility that cables could be run into the next room through air ventilation pipes and rehearsals and demo(s) could be recorded, but that is still in the plannings.

I will post pictures later on and also I’ll write some entries about the DIY stuff I am working on. Check the DIY category for posts.

For now this is the latest and greatest The Robot Initiative Studio.

IMG_1304 IMG_1303 IMG_1494 IMG_1495

The second studio was quite big space 32m2 and there was a small drywall in very odd place. The space was wide and there was a lot of room. The drywall was moved further back closer to the door giving more space for the studio part of the space. There were lot of planning for the acoustics of the space and DIY broadband absorbers were planned. I purchased rock wool (Paroc COS 5) for the purpose and fabric for seven elements. The COS 5 had 7 5cm thick slabs and I had purchased two packages giving material for seven 10cm thick elements.

The space could have accommodated full band and would have had the ability to record one. Although the building had office spaces and was not a living building (at least anymore) one man lived there and right above the studio space. We never caused him any noise disturbance, but once when I was tearing apart the drywall I banged it with a hammer (I did not have the right tools) he came to complain about the noise. He lived there legally. His flats lease was legal, all the paper work done with (his) company was legal with everything legal and he repeated the word “legal” so many times that it was suspicious. And I was not informed that someone lived there when I went to see the basement and when I signed the lease. He moved out of the building in November 2012 the same month I moved out. I had to give up the space because of unfortunate events and very wrong and unjustified behavior from behalf of my employer, thank you very much.

After the man moved away there probably would have not been any disturbance to anyone with full band playing because the building was empty after office hours. But now thats all history. Nice space with a lot of room and once I had all the stuff put into right places I had to pack up and move to a new space. This blog is about this current third studio space and construction of acoustics and stuff.

Industrial Military Complex -project that was started in the previous space and continued in this second studio space.

Here are random photos from the studio space that I have found (I.M.C. guitarist appears on that one picture):

IMG_0783 IMG_0782 IMG_0789 IMG_0820 IMG_0801 IMG_0794 IMG_0793 IMG_0864 IMG_0987 IMG_1007 IMG_1006

I.M.C. #002

 

The first “external” studio was 18m2 ex-storage room space which was operational for about three years. The layout was very difficult and I had no idea about acoustics at that time. You can see in on the photos that part of the space was only about 1m high and it took a lot out of the space. That area was only functional as storage space and the last position were the sofa was it fitted nicely under it.

Here are some pictures of the studio space while moving out of it to a new 32m2 space which was operational for about six months thanks to some “fairplay” from my employer at the time:

IMG_0668 IMG_0667 IMG_0666 IMG_0665

If I find more photos I will post them. This studio was quite small and took very long time to get all the stuff into a position to make the space work. Also Spex Lab project was active in this studio. And of course The Robot Initiative was also active in this version of The Robot Initiative Studio.

Spex Lab’s “The Book” and “Future Perfect” was recorded and mixed in this space. You can see from the pictures where the nearfield monitors where located (very close to the door) so take that into account if you ever listen to those songs and listen to the mixing.

I.M.C#001.

 

I started building the brick stands. First I needed to find the bricks for building them. I found suitable bricks from local store they we 257mm x 123mm x 57mm two of them put side by side would be big enough area for KRK VTX6. I also measured that the stand should be 860mm high so that the tweeter mid point would be in same height as my ears when I’m sitting at mixing position. With little measuring I found that fifteen layers of bricks would sum up to 855mm in height which was very good. Better too low than too high because it is easier to put something underneath that to try and remove something. So I eventually bought 60 bricks, two bricks per layer, fifteen layers per stand and two stands. I put the in the back of my car and bought four wooden sticks to give keep the bricks in place just in case.

While I was taking the bricks from my car to the studio a cranky old bus drove into the yard which looked kind of odd and out of place. It was Finnish bands Haloo Helsinki’s tour bus. It was quite strange because the area isn’t kind where you would expect to see something like that. And the music I had heard that other bands play didn’t sound like shit like that. It turned out that they had a bathroom break and the main reason the bus had stopped there was that one man came out and took a van. There is this company in the building that rents PA and other show technic stuff and probably organize gigs, so it was their van that the man took, probably went to get the PA stuff back.

Later on I bough piece of wood 15mm thick, four threaded rods M10 and shock nuts. The plan was to cut the wood into two pieces that would act as bottom plates for the stands. I drilled holes into the wood and hammered the shock nuts into place. Then I moved the bricks under the studio table and crawled to the other side of the studio table. I then put the threaded rods into place and put few bricks into place. I then tried to put them into position where the stands should be, or at least I tried doing so. I also put the wooden sticks into place. I put two threaded rods and two wooden sticks per stand. I then started piling the bricks keeping them in line with the rods. After I got the bricks into place with one stand I then repeated the process with the second stand. It took some time and my back did notice that I was doing something. I finally got both stands up. I then sawed the wooden sticks from the first stand so they wouldn’t stick out. They were 1 meter long and the stands were 855 mm high. I then started to saw the first threaded rod and it was a pain in the ass, but I got it done. I then started to saw the second rod, but it felt like the saw didn’t bite into the rod. It could have also been that I was running out of power from my hands, I have had very bad leg day that day, basically meaning that my walking was very difficult thanks to diabetic polyneuropathy. So I left everything as is. I was able to put the other VTX6 on the stand although the one rod was still sticking out. I decided that I would continue some other day.

The other day came and I continued with sawing of the threaded rods. This time around I put tapes on the rods to know where to saw. I also added sawed out piece of the wooden rod into the stand to keep the top most brick in place. Previously I had sawed one wooden stick too short. I was able to saw the other threaded rod from the stand that I didn’t do last time. Once again it took very long and felt like the saw wouldn’t bite into the rod. I screwed out the two rods from the other stand so I could saw them in a better place were there would have been more room. I sawed the wooden rods at the same time. After sawing the threaded rod for some time and looking at the result I saw nothing, it was like I hadn’t sawed it at all. I decided to give up. I thought the stand do not need the threaded rods they were there for extra security in the first place.

Now I was able to put both VTX6’s on their own stands and listen to them. They were not positioned correctly and stands were in wrong place, they weren’t equal distance from the wall, but I felt like that the work for now was done and I could just listen to music. I noticed that the right speaker seemed to be quieter. This was something I had to investigate to make sure there is nothing wrong with the monitors. It took me quite a long time to figure out that I could try out switching the monitors to see if there was the same effect. And I noticed that the right one felt quieter still. So it was the monitor positioning that caused the effect. There is also an issue that the back wall has a window on the left side of it. This is something I have to figure out what to do with in later on. For now the main focus were the speaker stands that were ready now. I only have to move them some day so that they are equal distance from the wall.

This one night that we were playing and recording guitars for Scared Of Me I came back to the studio after I had taken the guitarist home. I did some general moving stuff around and thought that now I could move the right monitor stand. I took a piece of wood, left out from acoustic element frame that I am working on. It is piece of eight element frame, I only have rockwool for seven elements at the moment. I put it against the monitor stands wooden bottom plate and started bounding it with a hammer. That thing payed off and the stands were now equal distance from the side walls. I did notice a change in the sound. I also noticed that the bass, panned center, sounded to be little on the left side while listening to Scared Of Me. This could be due the lack of acoustic treatment in the studio. This is an on going process and these massive monitor stands is just one little piece of it. I am going to move the table few more centimeters from the back wall. Then I have to move these stands in the “final position”. Then I have this thing I call The Thing. And I also have the acoustic element project going on.

IMG_1364 IMG_1363 IMG_1354 IMG_1353 IMG_1352 IMG_1343 IMG_1342